10.08.2019
Apple Remote Desktop 3.2 serial key or number

Apple Remote Desktop 3.2 serial key or number

By  Apple Remote Desktop 3.2 serial key or number  0 Comments
Apple Remote Desktop 3.2 serial key or number

Apple Remote Desktop 3.2 serial key or number

Chapter 3. Configuring Virtual Machines

This chapter provides detailed steps for configuring an Oracle VM VirtualBox virtual machine (VM). For an introduction to Oracle VM VirtualBox and steps to get your first virtual machine running, see Chapter 1, First Steps.

You have considerable latitude when deciding what virtual hardware to provide to the guest. Use virtual hardware to communicate with the host system or with other guests. For example, you can use virtual hardware in the following ways:

  • Have Oracle VM VirtualBox present an ISO CD-ROM image to a guest system as if it were a physical CD-ROM.

  • Provide a guest system access to the physical network through its virtual network card.

  • Provide the host system, other guests, and computers on the Internet access to the guest system.

3.1. Supported Guest Operating Systems

Because Oracle VM VirtualBox is designed to provide a generic virtualization environment for x86 systems, it can run operating systems (OSes) of any kind. However, Oracle VM VirtualBox focuses on the following guest systems:

  • Windows NT 4.0:

    • Fully supports all versions, editions, and service packs. Note that you might encounter issues with some older service packs, so install at least service pack 6a.

    • Guest Additions are available with a limited feature set.

  • Windows 2000, Windows XP, Windows Server 2003, Windows Vista, Windows Server 2008, Windows 7, Windows Server 2008 R2, Windows 8, Windows Server 2012, Windows 8.1, Windows Server 2012 R2, Windows 10 (non-Insider Preview releases), Windows Server 2016, Windows Server 2019:

    • Fully supports all versions, editions, and service packs, including 64-bit versions.

    • Note that you must enable hardware virtualization when running at least Windows 8.

    • Guest Additions are available.

  • MS-DOS, Windows 3.x, Windows 95, Windows 98, Windows ME:

    • Limited testing has been performed.

    • Use beyond legacy installation mechanisms is not recommended.

    • Guest Additions are not available.

  • Linux 2.4:

    Limited support.

  • Linux 2.6:

    • Fully supports all versions and editions, both 32-bit and 64-bit.

    • For best performance, use at least Linux kernel version 2.6.13.

    • Guest Additions are available.

  • Linux 3.x and later:

    • Fully supports all versions and editions, both 32-bit and 64-bit.

    • Guest Additions are available.

  • Oracle Solaris 10 and Oracle Solaris 11:

    • Fully supports all versions starting with Oracle Solaris 10 8/08 and Oracle Solaris 11.

    • Supports 64-bit prior to Oracle Solaris 11 11/11, and 32-bit.

    • Guest Additions are available.

  • FreeBSD:

    • Limited support.

    • Note that you must enable hardware virtualization when running FreeBSD.

    • Guest Additions are not available.

  • OpenBSD:

    • Supports at least version 3.7.

    • Note that you must enable hardware virtualization when running OpenBSD.

    • Guest Additions are not available.

  • OS/2 Warp 4.5:

    • Only MCP2 is supported. Other OS/2 versions might not work.

    • Note that you must enable hardware virtualization when running OS/2 Warp 4.5.

    • Guest Additions are available with a limited feature set. See Chapter 14, Known Limitations.

  • Mac OS X:

Oracle VM VirtualBox enables you to install and execute unmodified versions of Mac OS X guests on supported host hardware. Note that this feature is experimental and thus unsupported.

Oracle VM VirtualBox is the first product to provide the modern PC architecture expected by OS X without requiring any of the modifications used by competing virtualization solutions. For example, some competing solutions perform modifications to the Mac OS X install DVDs, such as a different boot loader and replaced files.

Be aware of the following important issues before you attempt to install a Mac OS X guest:

  • Mac OS X is commercial, licensed software and contains both license and technical restrictions that limit its use to certain hardware and usage scenarios. You must understand and comply with these restrictions.

    In particular, Apple prohibits the installation of most versions of Mac OS X on non-Apple hardware.

    These license restrictions are also enforced on a technical level. Mac OS X verifies that it is running on Apple hardware. Most DVDs that accompany Apple hardware check for the exact model. These restrictions are not circumvented by Oracle VM VirtualBox and continue to apply.

  • Only CPUs that are known and tested by Apple are supported. As a result, if your Intel CPU is newer than the Mac OS X build, or if you have a non-Intel CPU, you will likely encounter a panic during bootup with an "Unsupported CPU" exception.

    Ensure that you use the Mac OS X DVD that comes with your Apple hardware.

  • The Mac OS X installer expects the hard disk to be partitioned. So, the installer will not offer a partition selection to you. Before you can install the software successfully, start the Disk Utility from the Tools menu and partition the hard disk. Close the Disk Utility and proceed with the installation.

  • In addition, Mac OS X support in Oracle VM VirtualBox is an experimental feature. See Chapter 14, Known Limitations.

3.2. Unattended Guest Installation

Oracle VM VirtualBox can install a guest OS automatically. You only need to provide the installation medium and a few other parameters, such as the name of the default user.

Performing an unattended guest installation involves the following steps:

  • Create a new VM. Use one of the following methods:

    For the new VM, choose the guest OS type and accept the default settings for that OS. The following sections in this chapter describe how to change the settings for a VM.

  • Prepare the VM for unattended guest installation. Use the VBoxManage unattended command, see Section 8.37, “VBoxManage unattended”.

    During this step, Oracle VM VirtualBox scans the installation medium and changes certain parameters to ensure a seamless installation as a guest running on Oracle VM VirtualBox.

  • Start the VM. Use the VirtualBox Manager or the VBoxManage startvm command.

    When you start the VM, the unattended installation is performed automatically.

    The installation operation changes the boot device order to boot the virtual hard disk first and then the virtual DVD drive. If the virtual hard disk is empty prior to the automatic installation, the VM boots from the virtual DVD drive and begins the installation.

    If the virtual hard disk contains a bootable OS, the installation operation exits. In this case, change the boot device order manually by pressing F12 during the BIOS splash screen.

Section 3.2.1, “An Example of Unattended Guest Installation” describes how to perform an unattended guest installation for an Oracle Linux guest.

3.2.1. An Example of Unattended Guest Installation

The following example shows how to perform an unattended guest installation for an Oracle Linux VM. The example uses various VBoxManage commands to prepare the guest VM. The VBoxManage unattended install command is then used to install and configure the guest OS.

  1. Create the virtual machine.

    # VM="ol7-autoinstall" # VBoxManage list ostypes # VBoxManage createvm --name $VM --ostype "Oracle_64" --register

    Note the following:

    • The $VM variable represents the name of the VM.

    • The VBoxManage list ostypes command lists the guest OSes supported by Oracle VM VirtualBox, including the name used for each OS in the VBoxManage commands.

    • A 64-bit Oracle Linux 7 VM is created and registered with Oracle VM VirtualBox.

    • The VM has a unique UUID.

    • An XML settings file is generated.

  2. Create a virtual hard disk and storage devices for the VM.

    # VBoxManage createhd --filename /VirtualBox/$VM/$VM.vdi --size 32768 # VBoxManage storagectl $VM --name "SATA Controller" --add sata --controller IntelAHCI # VBoxManage storageattach $VM --storagectl "SATA Controller" --port 0 --device 0 \ --type hdd --medium /VirtualBox/$VM/$VM.vdi # VBoxManage storagectl $VM --name "IDE Controller" --add ide # VBoxManage storageattach $VM --storagectl "IDE Controller" --port 0 --device 0 \ --type dvddrive --medium /u01/Software/OL/OracleLinux-R7-U6-Server-x86_64-dvd.iso

    The previous commands do the following:

    • Create a 32768 MB virtual hard disk.

    • Create a SATA storage controller and attach the virtual hard disk.

    • Create an IDE storage controller for a virtual DVD drive and attach an Oracle Linux installation ISO.

  3. (Optional) Configure some settings for the VM.

    # VBoxManage modifyvm $VM --ioapic on # VBoxManage modifyvm $VM --boot1 dvd --boot2 disk --boot3 none --boot4 none # VBoxManage modifyvm $VM --memory 8192 --vram 128

    The previous commands do the following:

    • Enable I/O APIC for the motherboard of the VM.

    • Configure the boot device order for the VM.

    • Allocate 8192 MB of RAM and 128 MB of video RAM to the VM.

  4. Perform an unattended install of the OS.

    # VBoxManage unattended install $VM \ --iso=/u01/Software/OL/OracleLinux-R7-U6-Server-x86_64-dvd.iso \ --user= --full-user-name= --password \ --install-additions --time-zone=CET

    The previous command does the following:

    • Specifies an Oracle Linux ISO as the installation ISO.

    • Specifies a login name, full name, and login password for a default user on the guest OS.

      Note that the specified password is also used for the root user account on the guest.

    • Installs the Guest Additions on the VM.

    • Sets the time zone for the guest OS to Central European Time (CET).

  5. Start the virtual machine.

    This step completes the unattended installation process.

    # VBoxManage startvm $VM --type headless

    The VM starts in headless mode, which means that the VirtualBox Manager window does not open.

  6. (Optional) Update the guest OS to use the latest Oracle Linux packages.

    On the guest VM, run the following command:

    # yum update

Oracle VM VirtualBox virtualizes nearly all hardware of the host. Depending on a VM's configuration, the guest will see the following virtual hardware:

  • Input devices. Oracle VM VirtualBox can emulate a standard PS/2 keyboard and mouse. These devices are supported by most guest OSes.

    In addition, Oracle VM VirtualBox can provide virtual USB input devices to avoid having to capture mouse and keyboard, as described in Section 1.8.2, “Capturing and Releasing Keyboard and Mouse”.

  • Graphics. The default Oracle VM VirtualBox graphics device for Windows guests is an SVGA device. For Linux guests, the default graphics device emulates a VMware SVGA graphics device. See Section 3.6.1, “Screen Tab”.

    For legacy guest OSes, a VGA-compatible graphics device is available.

  • Storage. Oracle VM VirtualBox emulates the most common types of hard disk controllers. See Section 5.1, “Hard Disk Controllers”. Whereas supporting only one of these controllers would be enough for Oracle VM VirtualBox by itself, this multitude of storage adapters is required for compatibility with other hypervisors. Windows is very selective about its boot devices, and migrating VMs between hypervisors is very difficult or impossible if the storage controllers are different.

  • Networking. See Section 6.1, “Virtual Networking Hardware”.

  • USB. Oracle VM VirtualBox emulates these types of USB host controllers: xHCI, EHCI, and OHCI. While xHCI handles all USB transfer speeds, some legacy guest OSes may not support xHCI. Note that for some legacy Windows guests, third party drivers must be installed for xHCI support.

    Legacy guest OSes typically support OHCI and EHCI. These two controllers are needed because OHCI only handles USB low-speed and full-speed devices (both USB 1.x and 2.0), while EHCI only handles high-speed devices (USB 2.0 only).

    The emulated USB controllers do not communicate directly with devices on the host. Instead they communicate with a virtual USB layer which abstracts the USB protocol and enables the use of remote USB devices.

  • Audio. See Section 3.8, “Audio Settings”.

In the Settings window, under General, you can configure the most fundamental aspects of the virtual machine such as memory and essential hardware. The following tabs are available.

In the Basic tab of the General settings category, you can find these settings:

  • Name: The name of the the VM, as shown in the list of VMs in the main VirtualBox Manager window. Using this name, Oracle VM VirtualBox also saves the VM's configuration files. If you change the name, Oracle VM VirtualBox renames these files as well. As a result, you can only use characters which are allowed for file names on your host OS.

    Note that internally, Oracle VM VirtualBox uses unique identifiers (UUIDs) to identify virtual machines. You can display these using the VBoxManage commands.

  • Type: The type of the guest OS for the VM. This is the same setting that is specified in the New Virtual Machine wizard. See Section 1.7, “Creating Your First Virtual Machine”.

    Whereas the default settings of a newly created VM depend on the selected OS type, changing the type later has no effect on VM settings. This value is purely informational and decorative.

  • Version: The version of the guest OS for the VM. This is the same setting that is specified in the New Virtual Machine wizard. See Section 1.7, “Creating Your First Virtual Machine”.

The following settings are available in the Advanced tab:

  • Snapshot Folder: By default, Oracle VM VirtualBox saves snapshot data together with your other Oracle VM VirtualBox configuration data. See Section 10.1, “Where Oracle VM VirtualBox Stores its Files”. With this setting, you can specify any other folder for each VM.

  • Shared Clipboard: You can select here whether the clipboard of the guest OS should be shared with that of your host. If you select Bidirectional, then Oracle VM VirtualBox will always make sure that both clipboards contain the same data. If you select Host to Guest or Guest to Host, then Oracle VM VirtualBox will only ever copy clipboard data in one direction.

    Clipboard sharing requires that the Oracle VM VirtualBox Guest Additions be installed. In such a case, this setting has no effect. See Chapter 4, Guest Additions.

    For security reasons, the shared clipboard is disabled by default. This setting can be changed at any time using the Shared Clipboard menu item in the Devices menu of the virtual machine.

  • Drag and Drop: This setting enables support for drag and drop. Select an object, such as a file, from the host or guest and directly copy or open it on the guest or host. Multiple drag and drop modes for a VM enable restricting of access in either direction.

    For drag and drop to work the Guest Additions need to be installed on the guest.

    Note

    Drag and drop is disabled by default. This setting can be changed at any time using the Drag and Drop menu item in the Devices menu of the virtual machine.

    See Section 4.4, “Drag and Drop”.

On the Description tab you can enter a description for your virtual machine. This has no effect on the functionality of the machine, but you may find this space useful to note down things such as the configuration of a virtual machine and the software that has been installed into it.

To insert a line break into the Description text field, press Shift+Enter.

3.4.4. Disk Encryption Tab

The Disk Encryption tab enables you to encrypt disks that are attached to the virtual machine.

To enable disk encryption, select the Enable Disk Encryption check box.

Settings are available to configure the cipher used for encryption and the encryption password.

Note

All files related to the virtual machine except disk images are stored unencrypted.

The System category groups various settings that are related to the basic hardware that is presented to the virtual machine.

Note

As the activation mechanism of Microsoft Windows is sensitive to hardware changes, if you are changing hardware settings for a Windows guest, some of these changes may trigger a request for another activation with Microsoft.

The following tabs are available.

On the Motherboard tab, you can configure virtual hardware that would normally be on the motherboard of a real computer.

  • Base Memory: Sets the amount of RAM that is allocated and given to the VM when it is running. The specified amount of memory will be requested from the host OS, so it must be available or made available as free memory on the host when attempting to start the VM and will not be available to the host while the VM is running. This is the same setting that was specified in the New Virtual Machine wizard, as described in Section 1.7, “Creating Your First Virtual Machine”.

    Generally, it is possible to change the memory size after installing the guest OS. But you must not reduce the memory to an amount where the OS would no longer boot.

  • Boot Order: Determines the order in which the guest OS will attempt to boot from the various virtual boot devices. Analogous to a real PC's BIOS setting, Oracle VM VirtualBox can tell a guest OS to start from the virtual floppy, the virtual CD/DVD drive, the virtual hard drive (each of these as defined by the other VM settings), the network, or none of these.

    If you select Network, the VM will attempt to boot from a network using the PXE mechanism. This needs to be configured in detail on the command line. See Section 8.8, “VBoxManage modifyvm”.

  • Chipset: You can select which chipset will be presented to the virtual machine. PIIX3 is the default chipset for most guests. For some guest OSes such as Mac OS X, the PIIX3 chipset is not well supported. As a result, Oracle VM VirtualBox supports an emulation of the ICH9 chipset, which supports PCI express, three PCI buses, PCI-to-PCI bridges and Message Signaled Interrupts (MSI). This enables modern OSes to address more PCI devices and no longer requires IRQ sharing. Using the ICH9 chipset it is also possible to configure up to 36 network cards, compared to a maximum of eight network adapters with PIIX3. Note that ICH9 support is experimental and not recommended for guest OSes which do not require it.

  • Pointing Device: The default virtual pointing device for some guest OSes is the traditional PS/2 mouse. If set to USB Tablet, Oracle VM VirtualBox reports to the virtual machine that a USB tablet device is present and communicates mouse events to the virtual machine through this device. Another setting is USB Multi-Touch Tablet, which is suitable for guests running Windows 8 or later.

    Using the virtual USB tablet has the advantage that movements are reported in absolute coordinates, instead of as relative position changes. This enables Oracle VM VirtualBox to translate mouse events over the VM window into tablet events without having to "capture" the mouse in the guest as described in Section 1.8.2, “Capturing and Releasing Keyboard and Mouse”. This makes using the VM less tedious even if Guest Additions are not installed.

  • Enable I/O APIC: Advanced Programmable Interrupt Controllers (APICs) are an x86 hardware feature that have replaced Programmable Interrupt Controllers (PICs). With an I/O APIC, OSes can use more than 16 interrupt requests (IRQs) and therefore avoid IRQ sharing for improved reliability.

    Note

    Enabling the I/O APIC is required, especially for 64-bit Windows guest OSes. It is also required if you want to use more than one virtual CPU in a virtual machine.

    However, software support for I/O APICs has been unreliable with some OSes other than Windows. Also, the use of an I/O APIC slightly increases the overhead of virtualization and therefore slows down the guest OS a little.

    Warning

    All Windows OSes install different kernels, depending on whether an I/O APIC is available. As with ACPI, the I/O APIC therefore must not be turned off after installation of a Windows guest OS. Turning it on after installation will have no effect however.

  • Enable EFI: Enables Extensible Firmware Interface (EFI), which replaces the legacy BIOS and may be useful for certain advanced use cases. See Section 3.14, “Alternative Firmware (EFI)”.

  • Hardware Clock in UTC Time: If selected, Oracle VM VirtualBox will report the system time in UTC format to the guest instead of the local (host) time. This affects how the virtual real-time clock (RTC) operates and may be useful for UNIX-like guest OSes, which typically expect the hardware clock to be set to UTC.

In addition, you can turn off the Advanced Configuration and Power Interface (ACPI) which Oracle VM VirtualBox presents to the guest OS by default.

ACPI is the current industry standard to allow OSes to recognize hardware, configure motherboards and other devices and manage power. As most computers contain this feature and Windows and Linux support ACPI, it is also enabled by default in Oracle VM VirtualBox. ACPI can only be turned off using the command line. See Section 8.8, “VBoxManage modifyvm”.

Warning

All Windows OSes install different kernels, depending on whether ACPI is available. This means that ACPI must not be turned off after installation of a Windows guest OS. However, turning it on after installation will have no effect.

On the Processor tab, you can configure settings for the CPU used by the virtual machine.

  • Processor(s): Sets the number of virtual CPU cores the guest OSes can see. Oracle VM VirtualBox supports symmetrical multiprocessing (SMP) and can present up to 32 virtual CPU cores to each virtual machine.

    You should not configure virtual machines to use more CPU cores than are available physically. This includes real cores, with no hyperthreads.

  • Execution Cap: Configures the CPU execution cap. This limits the amount of time a host CPU spends to emulate a virtual CPU. The default setting is 100%, meaning that there is no limitation. A setting of 50% implies a single virtual CPU can use up to 50% of a single host CPU. Note that limiting the execution time of the virtual CPUs may cause guest timing problems.

    A warning is displayed at the bottom of the Processor tab if an Execution Cap setting is made that may affect system performance.

  • Enable PAE/NX: Determines whether the PAE and NX capabilities of the host CPU will be exposed to the virtual machine.

    PAE stands for Physical Address Extension. Normally, if enabled and supported by the OS, then even a 32-bit x86 CPU can access more than 4 GB of RAM. This is made possible by adding another 4 bits to memory addresses, so that with 36 bits, up to 64 GB can be addressed. Some OSes, such as Ubuntu Server, require PAE support from the CPU and cannot be run in a virtual machine without it.

  • Enable Nested VT-x/AMD-V: Enables nested virtualization, with passthrough of hardware virtualization functions to the guest VM.

With virtual machines running modern server OSes, Oracle VM VirtualBox also supports CPU hot-plugging. For details, see Section 9.4, “CPU Hot-Plugging”.

On this tab, you can configure Oracle VM VirtualBox to use hardware virtualization extensions that your host CPU supports.

In most cases, the default settings on the Acceleration tab will work well. Oracle VM VirtualBox selects sensible defaults, depending on the OS that you selected when you created the virtual machine. In certain situations, however, you may want to change the preconfigured defaults.

The following tabs are available for configuring the display for a virtual machine.

  • Video Memory: Sets the size of the memory provided by the virtual graphics card available to the guest, in MB. As with the main memory, the specified amount will be allocated from the host's resident memory. Based on the amount of video memory, higher resolutions and color depths may be available.

    The GUI will show a warning if the amount of video memory is too small to be able to switch the VM into full screen mode. The minimum value depends on the number of virtual monitors, the screen resolution and the color depth of the host display as well as on the use of 3D acceleration and 2D video acceleration. A rough estimate is (color depth / 8) x vertical pixels x horizontal pixels x number of screens = number of bytes. Extra memory may be required if display acceleration is used.

  • Monitor Count: With this setting, Oracle VM VirtualBox can provide more than one virtual monitor to a virtual machine. If a guest OS supports multiple attached monitors, Oracle VM VirtualBox can pretend that multiple virtual monitors are present. Up to eight such virtual monitors are supported.

    The output of the multiple monitors are displayed on the host in multiple VM windows which are running side by side. However, in full screen and seamless mode, they use the available physical monitors attached to the host. As a result, for full screen and seamless modes to work with multiple monitors, you will need at least as many physical monitors as you have virtual monitors configured, or Oracle VM VirtualBox will report an error.

    You can configure the relationship between guest and host monitors using the View menu by pressing Host key + Home when you are in full screen or seamless mode.

    See also Chapter 14, Known Limitations.

  • Scale Factor: Enables scaling of the display size. For multiple monitor displays, you can set the scale factor for individual monitors, or globally for all of the monitors. Use the slider to select a scaling factor up to 200%.

    You can set a default scale factor for all VMs. Use the Display tab in the Global Settings dialogs.

  • Graphics Controller: Specifies the graphics adapter type used by the guest VM. Note that you must install the Guest Additions on the guest VM to specify the VBoxSVGA or VMSVGA graphics controller. The following options are available:

    • VBoxSVGA: The default graphics controller for new VMs that use Windows 7 or later.

      This graphics controller improves performance and 3D support when compared to the legacy VBoxVGA option.

    • VBoxVGA: Use this graphics controller for legacy guest OSes. This is the default graphics controller for Windows versions before Windows 7 and for Oracle Solaris.

      3D acceleration is not supported for this graphics controller.

    • VMSVGA: Use this graphics controller to emulate a VMware SVGA graphics device. This is the default graphics controller for Linux guests.

    • None: Does not emulate a graphics adapter type.

  • Enable 3D Acceleration: If a virtual machine has Guest Additions installed, you can select here whether the guest should support accelerated 3D graphics. See Section 4.5.1, “Hardware 3D Acceleration (OpenGL and Direct3D 8/9)”.

  • Enable 2D Video Acceleration: If a virtual machine with Microsoft Windows has Guest Additions installed, you can select here whether the guest should support accelerated 2D video graphics. See Section 4.5.2, “Hardware 2D Video Acceleration for Windows Guests”.

3.6.2. Remote Display Tab

On the Remote Display tab, if the VirtualBox Remote Display Extension (VRDE) is installed, you can enable the VRDP server that is built into Oracle VM VirtualBox. This enables you to connect to the console of the virtual machine remotely with any standard RDP viewer, such as mstsc.exe that comes with Microsoft Windows. On Linux and Oracle Solaris systems you can use the standard open source rdesktop program. These features are described in Section 7.1, “Remote Display (VRDP Support)”.

  • Enable Server: Select this check box and configure settings for the remote display connection.

On the Recording tab you can enable video and audio recording for a virtual machine and change related settings. Note that these features can be enabled and disabled while a VM is running.

  • Enable Recording: Select this check box and select a Recording Mode option.

  • Recording Mode: You can choose to record video, audio, or both video and audio.

    Some settings on the Recording tab may be grayed out, depending on the Recording Mode setting.

  • File Path: The file where the recording is saved.

  • Frame Size: The video resolution of the recorded video, in pixels. The drop-down list enables you to select from common frame sizes.

  • Frame Rate: Use the slider to set the maximum number of video frames per second (FPS) to record. Frames that have a higher frequency are skipped. Increasing this value reduces the number of skipped frames and increases the file size.

  • Video Quality: Use the slider to set the the bit rate of the video in kilobits per second. Increasing this value improves the appearance of the video at the cost of an increased file size.

  • Audio Quality: Use the slider to set the quality of the audio recording. Increasing this value improves the audio quality at the cost of an increased file size.

  • Screens: For a multiple monitor display, you can select which screens to record video from.

As you adjust the video and audio recording settings, the approximate output file size for a five minute video is shown.

The Storage category in the VM settings enables you to connect virtual hard disk, CD/DVD, and floppy images and drives to your virtual machine.

In a real computer, so-called storage controllers connect physical disk drives to the rest of the computer. Similarly, Oracle VM VirtualBox presents virtual storage controllers to a virtual machine. Under each controller, the virtual devices, such as hard disks, CD/DVD or floppy drives, attached to the controller are shown.

Note

This section gives a quick introduction to the Oracle VM VirtualBox storage settings. See Chapter 5, Virtual Storage for a full description of the available storage settings in Oracle VM VirtualBox.

If you have used the Create VM wizard to create a machine, you will normally see something like the following:

Figure 3.1. Storage Settings for a Virtual Machine

Depending on the guest OS type that you selected when you created the VM, a new VM includes the following storage devices:

  • IDE controller. A virtual CD/DVD drive is attached to the secondary master port of the IDE controller.

  • SATA controller. This is a modern type of storage controller for higher hard disk data throughput, to which the virtual hard disks are attached. Initially you will normally have one such virtual disk, but as shown in the previous screenshot, you can have more than one. Each is represented by a disk image file, such as a VDI file in this example.

If you created your VM with an older version of Oracle VM VirtualBox, the default storage layout may differ. You might then only have an IDE controller to which both the CD/DVD drive and the hard disks have been attached. This might also apply if you selected an older OS type when you created the VM. Since older OSes do not support SATA without additional drivers, Oracle VM VirtualBox will make sure that no such devices are present initially. See Section 5.1, “Hard Disk Controllers”.

Oracle VM VirtualBox also provides a floppy controller. You cannot add devices other than floppy drives to this controller. Virtual floppy drives, like virtual CD/DVD drives, can be connected to either a host floppy drive, if you have one, or a disk image, which in this case must be in RAW format.

You can modify these media attachments freely. For example, if you wish to copy some files from another virtual disk that you created, you can connect that disk as a second hard disk, as in the above screenshot. You could also add a second virtual CD/DVD drive, or change where these items are attached. The following options are available:

  • To add another virtual hard disk, or a CD/DVD or floppy drive, select the storage controller to which it should be added (such as IDE, SATA, SCSI, SAS, floppy controller) and then click the Add Disk button below the tree. You can then either select Optical Drive or Hard Disk. If you clicked on a floppy controller, you can add a floppy drive instead. Alternatively, right-click on the storage controller and select a menu item there.

    A dialog is displayed, enabling you to select an existing disk image file or to create a new disk image file. Depending on the type of disk image, the dialog is called Hard Disk Selector, Optical Disk Selector, or Floppy Disk Selector.

    See Section 5.2, “Disk Image Files (VDI, VMDK, VHD, HDD)” for information on the image file types that are supported by Oracle VM VirtualBox.

    For virtual CD/DVD drives, the image files will typically be in the standard ISO format instead. Most commonly, you will select this option when installing an OS from an ISO file that you have obtained from the Internet. For example, most Linux distributions are available in this way.

    Depending on the type of disk image, you can set the following Attributes for the disk image in the right part of the Storage settings page:

    • The device slot of the controller that the virtual disk is connected to. IDE controllers have four slots which have traditionally been called primary master, primary slave, secondary master, and secondary slave. By contrast, SATA and SCSI controllers offer you up to 30 slots for attaching virtual devices.

    • Solid-state Drive presents a virtual disk to the guest as a solid-state device.

    • Hot-pluggable presents a virtual disk to the guest as a hot-pluggable device.

    • For virtual CD/DVD drives, you can select Live CD/DVD. This means that the virtual optical disk is not removed from when the guest system ejects it.

  • To remove an attachment, either select it and click on the Remove icon at the bottom, or right-click on it and select the menu item.

Removable media, such as CD/DVDs and floppies, can be changed while the guest is running. Since the Settings dialog is not available at that time, you can also access these settings from the Devices menu of your virtual machine window.

The Audio section in a virtual machine's Settings window determines whether the VM will detect a connected sound card, and if the audio output should be played on the host system.

To enable audio for a guest, select the Enable Audio check box. The following settings are available:

  • Host Audio Driver: The audio driver that Oracle VM VirtualBox uses on the host. On a Linux host, depending on your host configuration, you can select between the OSS, ALSA, or the PulseAudio subsystem. On newer Linux distributions, the PulseAudio subsystem is preferred.

    Only OSS is supported on Oracle Solaris hosts. The Oracle Solaris Audio audio backend is no longer supported on Oracle Solaris hosts.

  • Audio Controller: You can choose between the emulation of an Intel AC'97 controller, an Intel HD Audio controller, or a SoundBlaster 16 card.

  • Enable Audio Output: Enables audio output only for the VM.

  • Enable Audio Input: Enables audio input only for the VM.

The Network section in a virtual machine's Settings window enables you to configure how Oracle VM VirtualBox presents virtual network cards to your VM, and how they operate.

When you first create a virtual machine, Oracle VM VirtualBox by default enables one virtual network card and selects the Network Address Translation (NAT) mode for it. This way the guest can connect to the outside world using the host's networking and the outside world can connect to services on the guest which you choose to make visible outside of the virtual machine.

This default setup is good for the majority of Oracle VM VirtualBox users. However, Oracle VM VirtualBox is extremely flexible in how it can virtualize networking. It supports many virtual network cards per virtual machine. The first four virtual network cards can be configured in detail in the VirtualBox Manager window. Additional network cards can be configured using the VBoxManage command.

Many networking options are available. See Chapter 6, Virtual Networking for more information.

Oracle VM VirtualBox supports the use of virtual serial ports in a virtual machine.

Ever since the original IBM PC, personal computers have been equipped with one or two serial ports, also called COM ports by DOS and Windows. Serial ports were commonly used with modems, and some computer mice used to be connected to serial ports before USB became commonplace.

While serial ports are no longer as common as they used to be, there are still some important uses left for them. For example, serial ports can be used to set up a primitive network over a null-modem cable, in case Ethernet is not available. Also, serial ports are indispensable for system programmers needing to do kernel debugging, since kernel debugging software usually interacts with developers over a serial port. With virtual serial ports, system programmers can do kernel debugging on a virtual machine instead of needing a real computer to connect to.

If a virtual serial port is enabled, the guest OS sees a standard 16550A compatible UART device. Other UART types can be configured using the VBoxManage modifyvm command. Both receiving and transmitting data is supported. How this virtual serial port is then connected to the host is configurable, and the details depend on your host OS.

You can use either the Settings tabs or the VBoxManage command to set up virtual serial ports. For the latter, see Section 8.8, “VBoxManage modifyvm” for information on the , and options.

You can configure up to four virtual serial ports per virtual machine. For each device, you must set the following:

  1. Port Number: This determines the serial port that the virtual machine should see. For best results, use the traditional values as follows:

    • COM1: I/O base 0x3F8, IRQ 4

    • COM2: I/O base 0x2F8, IRQ 3

    • COM3: I/O base 0x3E8, IRQ 4

    • COM4: I/O base 0x2E8, IRQ 3

    You can also configure a user-defined serial port. Enter an I/O base address and interrupt (IRQ).

  2. Port Mode: What the virtual port is connected to. For each virtual serial port, you have the following options:

    • Disconnected: The guest will see the device, but it will behave as if no cable had been connected to it.

    • Host Device: Connects the virtual serial port to a physical serial port on your host. On a Windows host, this will be a name like . On Linux or Oracle Solaris hosts, it will be a device node like . Oracle VM VirtualBox will then simply redirect all data received from and sent to the virtual serial port to the physical device.

    • Host Pipe: Configure Oracle VM VirtualBox to connect the virtual serial port to a software pipe on the host. This depends on your host OS, as follows:

      • On a Windows host, data will be sent and received through a named pipe. The pipe name must be in the format where should identify the virtual machine but may be freely chosen.

      • On a Mac OS, Linux, or Oracle Solaris host, a local domain socket is used instead. The socket filename must be chosen such that the user running Oracle VM VirtualBox has sufficient privileges to create and write to it. The directory is often a good candidate.

        On Linux there are various tools which can connect to a local domain socket or create one in server mode. The most flexible tool is socat and is available as part of many distributions.

      In this case, you can configure whether Oracle VM VirtualBox should create the named pipe, or the local domain socket non-Windows hosts, itself or whether Oracle VM VirtualBox should assume that the pipe or socket exists already. With the VBoxManage command-line options, this is referred to as server mode or client mode, respectively.

      For a direct connection between two virtual machines, corresponding to a null-modem cable, simply configure one VM to create a pipe or socket and another to attach to it.

    • Raw File: Send the virtual serial port output to a file. This option is very useful for capturing diagnostic output from a guest. Any file may be used for this purpose, as long as the user running Oracle VM VirtualBox has sufficient privileges to create and write to the file.

    • TCP Socket: Useful for forwarding serial traffic over TCP/IP, acting as a server, or it can act as a TCP client connecting to other servers. This option enables a remote machine to directly connect to the guest's serial port using TCP.

      • TCP Server: Deselect the Connect to Existing Pipe/Socket check box and specify the port number in the Path/Address field. This is typically 23 or 2023. Note that on UNIX-like systems you will have to use a port a number greater than 1024 for regular users.

        The client can use software such as PuTTY or the telnet command line tool to access the TCP Server.

      • TCP Client: To create a virtual null-modem cable over the Internet or LAN, the other side can connect using TCP by specifying in the Path/Address field. The TCP socket will act in client mode if you select the Connect to Existing Pipe/Socket check box.

Up to four serial ports can be configured per virtual machine, but you can pick any port numbers out of the above. However, serial ports cannot reliably share interrupts. If both ports are to be used at the same time, they must use different interrupt levels, for example COM1 and COM2, but not COM1 and COM3.

The USB section in a virtual machine's Settings window enables you to configure Oracle VM VirtualBox's sophisticated USB support.

Oracle VM VirtualBox can enable virtual machines to access the USB devices on your host directly. To achieve this, Oracle VM VirtualBox presents the guest OS with a virtual USB controller. As soon as the guest system starts using a USB device, it will appear as unavailable on the host.

Note

  • Be careful with USB devices that are currently in use on the host. For example, if you allow your guest to connect to your USB hard disk that is currently mounted on the host, when the guest is activated, it will be disconnected from the host without a proper shutdown. This may cause data loss.

  • Oracle Solaris hosts have a few known limitations regarding USB support. See Chapter 14, Known Limitations.

In addition to allowing a guest access to your local USB devices, Oracle VM VirtualBox even enables your guests to connect to remote USB devices by use of the VirtualBox Remote Desktop Extension (VRDE). See Section 7.1.4, “Remote USB”.

To enable USB for a VM, select the Enable USB Controller check box. The following settings are available:

  • USB Controller: Selects a controller with the specified level of USB support, as follows:

    • OHCI for USB 1.1

    • EHCI for USB 2.0. This also enables OHCI.

    • xHCI for USB 3.0. This supports all USB speeds.

  • USB Device Filters: When USB support is enabled for a VM, you can determine in detail which devices will be automatically attached to the guest. For this, you can create filters by specifying certain properties of the USB device. USB devices with a matching filter will be automatically passed to the guest once they are attached to the host. USB devices without a matching filter can be passed manually to the guest, for example by using the Devices, USB menu.

    Clicking on the + button to the right of the USB Device Filters window creates a new filter. You can give the filter a name, for later reference, and specify the filter criteria. The more criteria you specify, the more precisely devices will be selected. For instance, if you specify only a vendor ID of 046d, all devices produced by Logitech will be available to the guest. If you fill in all fields, on the other hand, the filter will only apply to a particular device model from a particular vendor, and not even to other devices of the same type with a different revision and serial number.

    In detail, the following criteria are available:

    • Vendor and Product ID. With USB, each vendor of USB products carries an identification number that is unique world-wide, called the vendor ID. Similarly, each line of products is assigned a product ID number. Both numbers are commonly written in hexadecimal, and a colon separates the vendor from the product ID. For example, stands for Logitech as a vendor, and the M-UV69a Optical Wheel Mouse product.

      Alternatively, you can also specify Manufacturer and Product by name.

      To list all the USB devices that are connected to your host machine with their respective vendor IDs and product IDs, use the following command:

      VBoxManage list usbhost

      On Windows, you can also see all USB devices that are attached to your system in the Device Manager. On Linux, you can use the lsusb command.

    • Serial Number. While vendor ID and product ID are quite specific to identify USB devices, if you have two identical devices of the same brand and product line, you will also need their serial numbers to filter them out correctly.

    • Remote. This setting specifies whether the device will be local only, remote only, such as over VRDP, or either.

    On a Windows host, you will need to unplug and reconnect a USB device to use it after creating a filter for it.

    As an example, you could create a new USB filter and specify a vendor ID of 046d for Logitech, Inc, a manufacturer index of 1, and "not remote". Then any USB devices on the host system produced by Logitech, Inc with a manufacturer index of 1 will be visible to the guest system.

    Several filters can select a single device. For example, a filter which selects all Logitech devices, and one which selects a particular webcam.

    You can deactivate filters without deleting them by deselecting the check box next to the filter name.

3.11.2. Implementation Notes for Windows and Linux Hosts

On Windows hosts, a kernel mode device driver provides USB proxy support. It implements both a USB monitor, which enables Oracle VM VirtualBox to capture devices when they are plugged in, and a USB device driver to claim USB devices for a particular virtual machine. System reboots are not necessary after installing the driver. Also, you do not need to replug devices for Oracle VM VirtualBox to claim them.

On supported Linux hosts, Oracle VM VirtualBox accesses USB devices through special files in the file system. When Oracle VM VirtualBox is installed, these are made available to all users in the system group. In order to be able to access USB from guest systems, make sure that you are a member of this group.

Shared folders enable you to easily exchange data between a virtual machine and your host. This feature requires that the Oracle VM VirtualBox Guest Additions be installed in a virtual machine and is described in detail in Section 4.3, “Shared Folders”.

The User Interface section enables you to change certain aspects of the user interface of this VM.

  • Menu Bar: This widget enables you to disable menus by clicking on the menu to release it, menu entries by deselecting the check box of the entry to disable it and the complete menu bar by deselecting the rightmost check box.

  • Mini ToolBar: In full screen or seamless mode, Oracle VM VirtualBox can display a small toolbar that contains some of the items that are normally available from the virtual machine's menu bar. This toolbar reduces itself to a small gray line unless you move the mouse over it. With the toolbar, you can return from full screen or seamless mode, control machine execution or enable certain devices. If you do not want to see the toolbar, disable this setting.

    The second setting enables you to show the toolbar at the top of the screen, instead of showing it at the bottom.

  • Status Bar: This widget enables you to disable icons on the status bar by deselecting the check box of an icon to disable it, to rearrange icons by dragging and dropping the icon, and to disable the complete status bar by deselecting the leftmost check box.

3.14. Alternative Firmware (EFI)

Oracle VM VirtualBox includes experimental support for the Extensible Firmware Interface (EFI), which is an industry standard intended to replace the legacy BIOS as the primary interface for bootstrapping computers and certain system services later.

By default, Oracle VM VirtualBox uses the BIOS firmware for virtual machines. To use EFI for a given virtual machine, you can enable EFI in the machine's Settings dialog. See Section 3.5.1, “Motherboard Tab”. Alternatively, use the VBoxManage command line interface as follows:

VBoxManage modifyvm "VM name" --firmware efi

To switch back to using the BIOS:

VBoxManage modifyvm "VM name" --firmware bios

One notable user of EFI is Apple Mac OS X. More recent Linux versions and Windows releases, starting with Vista, also offer special versions that can be booted using EFI.

Another possible use of EFI in Oracle VM VirtualBox is development and testing of EFI applications, without booting any OS.

Note that the Oracle VM VirtualBox EFI support is experimental and will be enhanced as EFI matures and becomes more widespread. Mac OS X, Linux, and newer Windows guests are known to work fine. Windows 7 guests are unable to boot with the Oracle VM VirtualBox EFI implementation.

3.14.1. Video Modes in EFI

EFI provides two distinct video interfaces: GOP (Graphics Output Protocol) and UGA (Universal Graphics Adapter). Modern OSes, such as Mac OS X, generally use GOP, while some older ones still use UGA. Oracle VM VirtualBox provides a configuration option to control the graphics resolution for both interfaces, making the difference mostly irrelevant for users.

The default resolution is 1024x768. To select a graphics resolution for EFI, use the following VBoxManage command:

VBoxManage setextradata "VM name" VBoxInternal2/EfiGraphicsResolution HxV

Determine the horizontal resolution H and the vertical resolution V from the following list of default resolutions:

VGA

640x480, 32bpp, 4:3

SVGA

800x600, 32bpp, 4:3

XGA

1024x768, 32bpp, 4:3

XGA+

1152x864, 32bpp, 4:3

HD

1280x720, 32bpp, 16:9

WXGA

1280x800, 32bpp, 16:10

SXGA

1280x1024, 32bpp, 5:4

SXGA+

1400x1050, 32bpp, 4:3

WXGA+

1440x900, 32bpp, 16:10

HD+

1600x900, 32bpp, 16:9

UXGA

1600x1200, 32bpp, 4:3

WSXGA+

1680x1050, 32bpp, 16:10

Full HD

1920x1080, 32bpp, 16:9

WUXGA

1920x1200, 32bpp, 16:10

DCI 2K

2048x1080, 32bpp, 19:10

Full HD+

2160x1440, 32bpp, 3:2

Unnamed

2304x1440, 32bpp, 16:10

QHD

2560x1440, 32bpp, 16:9

WQXGA

2560x1600, 32bpp, 16:10

QWXGA+

2880x1800, 32bpp, 16:10

QHD+

3200x1800, 32bpp, 16:9

WQSXGA

3200x2048, 32bpp, 16:10

4K UHD

3840x2160, 32bpp, 16:9

WQUXGA

3840x2400, 32bpp, 16:10

DCI 4K

4096x2160, 32bpp, 19:10

HXGA

4096x3072, 32bpp, 4:3

UHD+

5120x2880, 32bpp, 16:9

WHXGA

5120x3200, 32bpp, 16:10

WHSXGA

6400x4096, 32bpp, 16:10

HUXGA

6400x4800, 32bpp, 4:3

8K UHD2

7680x4320, 32bpp, 16:9

If this list of default resolution does not cover your needs, see Section 9.6.1, “Custom VESA Resolutions”. Note that the color depth value specified in a custom video mode must be specified. Color depths of 8, 16, 24, and 32 are accepted. EFI assumes a color depth of 32 by default.

The EFI default video resolution settings can only be changed when the VM is powered off.

3.14.2. Specifying Boot Arguments

It is currently not possible to manipulate EFI variables from within a running guest. For example, setting the variable by running the nvram tool in a Mac OS X guest will not work. As an alternative method, extradata can be passed to a VM in order to set the variable. To change the EFI variable, use the following command:

VBoxManage setextradata "VM name" VBoxInternal2/EfiBootArgs <value>
Источник: [https://torrent-igruha.org/3551-portal.html]
, Apple Remote Desktop 3.2 serial key or number

Homebrew Formulae

0-ad0 A.D.0.0.23b-alpha010-editor010 Editor10.0.20xed0xED1.1.4115browser115Browser23.9.1.71clipboard1Clipboard0.1.81password1Password7.61password-cli1Password CLI1.7.0360safe360 Total Security1.2.63cxphone3CXPhone163dgenceslicer3DGence Slicer1.3.2_r14054k-slideshow-maker4K Slideshow Maker1.8.1.10294k-stogram4K Stogram3.1.0.33004k-video-downloader4K Video Downloader4.13.1.38404k-video-to-mp34K Video to MP32.6.1.9134k-youtube-to-mp34K YouTube to MP33.13.1.38504peaks4Peaks1.85kplayer5KPlayer6.3.08bitdo-ultimate-software8BitDo Ultimate Software1.3.08x8-meet8x8 Meetlatesta-better-finder-attributesA Better Finder Attributes6.25a-better-finder-renameA Better Finder Rename11.22a-slower-speed-of-lightA Slower Speed of Lightsummer12ableton-liveAbleton Live10.1.18ableton-live-introAbleton Live Intro10.1.18ableton-live-liteAbleton Live Lite10.1.18ableton-live-standardAbleton Live Standard10.1.18ableton-live-suiteAbleton Live Suite10.1.18abricotineabricotine0.7.0abscissaAbscissa4.0.4abstractAbstract96.0.1accessmenubarappsAccessMenuBarApps2.6.1accuricsAccurics CLI1.0.4ace-linkAce Link1.6.0acornAcorn6.6.1acousticbrainz-guiAcousticBrainz0.1acquia-devAcquia Dev Desktop2.2020.08.10acronis-true-imageAcronis True Image2021acslogoACSLogo1.6activedockActiveDock2.51,2051activitywatchActivityWatch0.9.2actual-odbc-packActual ODBC Driver Packlatestadafruit-arduinoAdafruit Arduino1.6.4adapterAdapter2.1.6adguardAdguard2.4.8.797adiumAdium1.5.10.4adobe-acrobat-proAdobe Acrobat Pro DC19adobe-acrobat-readerAdobe Acrobat Reader DC20.012.20041adobe-airAdobe AIR32.0.0.125adobe-air-sdkAdobe AIR SDK31.0.0.96adobe-connectAdobe Connect10.2,2019.9.2adobe-creative-cloudAdobe Creative Cloud5.2.0.436adobe-creative-cloud-cleaner-toolAdobe Creative Cloud Cleaner Toollatestadobe-digital-editionsAdobe Digital Editions4.5.11adobe-dng-converterAdobe Camera Raw and DNG Converter12.4adobe-lens-profile-creatorAdobe Lens Profile Creator1.0.4adoptopenjdkAdoptOpenJDK Java Development Kit15,36advancedrestclientAdvanced Rest Client15.0.7adventureAdventure2.1adware-removal-toolBitdefender Adware Removal Tool for MaclatestaegisubAegisub3.2.2aerialAerial Screensaver2.0.9aetherAether2.0.0-dev.14,191216135...aexol-remote-mouseAexol Remote Mouselatestafter-dark-classicAfter Dark Classic SetlatestagendaAgenda11.0agfeo-dashboardAGFEO Dashboard1.2.0,A145F3A9D3FECE0B...aimersoft-video-converter-ultimateAimersoft Video Converter Ultimate11.6.5.2air-connectAir Connect2.0.1air-video-server-hdAir Video Server HD2.3.0-beta1u1aircallAircall2.5.12airdisplayAir Display3.4.2airdroidAirDroid3.6.8.0airflowAirflow3.1.9airfoilAirfoil5.9.1airmediaCrestron AirMedia3.2.1airparrotAirParrot3.0.0airpassAirpass1.0.1airqmonAirqmon2.0.0airserverAirServer7.2.6airtableAirtable1.4.4airtameAirtame4.1.1airtoolAirtool1.9.1airtrashairtrash1.0.0airunlockAirUnlock0.4airyAiry3.18,301aja-system-testAJA System Test2.1.0ajourAjour0.3.3alacrittyAlacritty0.5.0aladinAladin DesktoplatestalchemyAlchemy008aleph-oneAleph One20200904alfaviewAlfaview8.8.3alfredAlfred4.1.1_1172algodooAlgodoo2.1.3alinof-timerAlinof TimerlatestaliwangwangAli Wangwang20180413-1510-8.00.44aliworkbenchAliWorkBench9.04.02all-in-one-messengerAll-in-One Messenger2.2.2alloyAlloy5.1.0alt-cAlt-C1.0.7alt-tabalt-tab6.6.0altair-graphql-clientAltair GraphQL Client2.5.1altdeployAltDeploy1.1alternoteAlternote1.0.18,1018altserverAltServer1.3.2alvaAlva0.9.1amadeus-proAmadeus Pro2.8.4amadineAmadine1.0.9amazon-chimeAmazon Chime4.34.8064amazon-musicAmazon Music7.13.0.2210,942210_879...amazon-photosAmazon Drivelatestamazon-workdocsAmazon WorkDocs1.2.203.37amazon-workspacesAmazon Workspaces3.0.10.1308amd-power-gadgetAMD Power Gadget0.6.5amethystAmethyst0.15.3amitv87-pipPiP1.40ammAMM0.4.5ammoniteAmmonite1.20amorphousdiskmarkAmorphousDiskMarklatestamppsAMPPS3.9anacondaContinuum Analytics Anaconda2020.07ananas-analytics-desktop-editionAnanas Analytics Desktop Edition0.9.0android-file-transferAndroid File Transferlatestandroid-messagesAndroid Messages Desktop3.1.0android-ndkAndroid NDK21android-platform-toolsAndroid SDK Platform-Tools30.0.0android-sdkandroid-sdk4333796android-studioAndroid Studio4.0.1.0,193.6626763androidtoolAndroidTool1.66angbandAngband4.2.1angry-ip-scannerAngry IP Scanner3.7.2anka-build-cloud-registryAnka Build Cloud Registry1.11.0-d43f91canka-virtualizationAnka Virtualization2.2.3.118ankiAnki2.1.34ankiapp-ankiAnkiApplatestanonymAnonym2.3anonymousvpnAnonymous VPNlatestanother-redis-desktop-managerAnother Redis Desktop Manager1.3.8ansible-dkAnsible DK1.2.0,3antconcAntConc3.5.8anvilAnvil1.1.8,132anybarAnyBar0.2.1anydeskAnyDesk6.0.2anydoAny.do4.2.106anylistAnyList1.1anytransAnyTranslatestanytrans-for-androidAnyTrans for AndroidlatestanzeigenchefAnzeigenChef2.1.045aoAo6.9.0apache-couchdbApache CouchDB3.1.1apache-directory-studioApache Directory Studio2.0.0.v20200411-M15apk-icon-editorAPK Icon Editor2.2.0app-cleanerNektony App Cleaner & Uninstaller7.1app-tamerAppTamer2.5.2apparencyApparency1.1appcleanerFreeMacSoft AppCleaner3.5appcodeAppCode2020.2.3,202.7319.70appdeleteAppDelete4.3.3appgate-sdp-clientAppGate SDP Client for macOS5.2.1appgridAppGrid1.0.4appiumAppium Desktop1.18.0-2apple-eventsApple Events1.6apple-juiceApple Juice1.10.2applepi-bakerApplePi-Baker2.2.3apppoliceAppPolice1.1appstore-quickviewApp...Store QuickviewlatestappstudioNSB/AppStudiolatestapptivateApptivatelatestapptrapAppTrap1.2.3appzapperAppZapper2.0.3aptanastudioAptana Studio3.7.2.201807301111aptibleAptible Toolbelt0.16.7,20200812001716,217aqua-data-studioAquafold Aqua Data Studio20.6.0-4aquamacsAquamacs3.5aquaskkAquaSKK4.7.1aquatermAquaTerm1.1.1araxis-mergeAraxis Merge2020.5400archiArchimate modeling4.7.1,71cb57ddarchipelagoArchipelago3.11.0archiverArchiver3.0.9arduinoArduino1.8.13aria-maestosaAria Maestosa1.4.13aria2dAria2D1.3.5aria2guiAria2GUI1.4.1ariangAriaNg Native1.1.7ark-desktop-walletArk Desktop Wallet2.9.3armitageArmitage15.08.13armoryArmory0.96.5arqArq6.2.54arq-cloud-backupArq Cloud Backup1.4.7arrayfireArrayFire3.6.4arrsyncarRsync0.4.1art-directors-toolkitArt Directors Toolkit5.5.1artisanArtisan2.4.0artpipArtpiplatestasc-timetablesaSc TimeTables2020.7.1ascensionAscension3.0.0asciidocfxAsciidocFX1.7.3aspera-connectAspera Connect3.10.0.180973asset-catalog-tinkererAsset Catalog Tinkerer2.5.1astah-professionalChange Vision Astah Professional8.2.0,b743f7astro-command-centerASTRO Command CenterlatestastropadAstropad3.4.1astropad-studioAstropad Studio3.4.1atextaText2.36.5atlantisAtlantis0.9.9.7atlauncherATLauncherlatestatokATOK2017,31atomGithub Atom1.51.0au-labAU Lablatestaudio-hijackAudio Hijack3.7.2audiobook-builderAudiobook Builder2.1audiobookbinderAudiobook Binder2.1audioscrobblerAudioscrobbler0.9.15audioslicerAudioSlicer1.1.1audirvanaAudirvana3.5.40augurAugur1.16.11auristor-clientAuriStor File System Client0.197.1auroraAurora5.0.3aurora-hdrAurora HDR1.0.0.5825auryoAuryo2.5.4authyAuthy Desktop1.8.3autodesk-fusion360Autodesk Fusion 360latestautodmgAutoDMG1.9autofirmaAutoFirma1.6.5automuteAutoMute1.1autopkgrAutoPkgr1.5.5autovolumeAutoVolume1.0.1autumnAutumn1.0.7avast-secureline-vpnAvast SecureLine VPNlatestavast-securityAvast Securitylatestavg-antivirusAVG Antivirus for Maclatestaviatrix-vpn-clientAviatrix VPN Client2.12.10avibrazil-rdmRDM2.2avidcodecsleAvid DNxHR codec2.3.7avidemuxAvidemux2.7.6avira-antivirusAvira AntiviruslatestavitoolsAVItools3.7.2avocodeAvocode4.9.1avogadroAvogadro1.90.0awaAWA1.5.6awareAware1.0.5awarenessAwareness1.1awips-pythonAWIPS Pythonlatestaws-vaultaws-vault6.1.0aws-vpn-clientAWS Client VPNlatestaxe-edit-iiiAxe-Edit III1.07.01axe-electrumAxe Electrum3.3.8.9axure-rpAxure RP9.0.0.3717azure-data-studioAzure Data Studio1.22.0,77b9a708df3679c...babeleditBabelEdit2.7.1back-in-timeBack-In-Time5.1.3backblazeBackblaze7.0.2.464backblaze-downloaderBackblaze Downloaderlatestbackground-musicBackground Music0.3.2backlogBacklog1.8.0backuploupeBackupLoupe3.0.6badlion-clientBadlion Client2.16.1baiducloudBaidu Cloud2.4.6baiduinputBaidu InputlatestbaidunetdiskBaidu NetDisk3.4.1balance-lockBalance Lock1.0.6balenaetcherEtcher1.5.109ballastballast1.2.1balsamiq-wireframesBalsamiq Wireframes4.1.4bandageBandage0.8.1bankidBankID7.9.2banking-4Banking 47.4.0banktivityBanktivity7.5.3bansheeBanshee2.6.1baretorrentbaretorrent0.4.4baritoneBaritone1.0.9barrierBarrier2.3.3bartenderBartender3.1.23barxtempbarXtemp1.3.3baseMenial Base2.5.1basecampBasecamp3basictexBasicTeX2020.0407batchmodBatChmod1.7b5bathyscapheBathyScaphe310-v1089batteriesBatteries2.0.1battery-guardianBattery Guardian1.1.0battery-reportBattery Report1.2.0battle-netBlizzard Battle.netlatestbattlescribeBattleScribe2.03.21baudlinebaudline1.08bbc-iplayer-downloadsBBC iPlayer Downloads2.12.5bbeditBBEdit13.1.3bdashBdash1.8.3bdinfoBDInfolatestbeacon-scannerBeaconScanner1.1.13beaker-browserBeaker Browser0.8.10beamerBeamer3.4beanBeanlatestbeardedspiceBeardedSpice2.2.3bearychatBearyChatlatestbeatport-proBeatport Pro2.4.5_188beatunesbeaTunes5.2.13beautuneBeautune1.0.5beeBee3.1.5,5468beekeeper-studioBeekeeper Studio1.7.5beersmithBeerSmith3.1.8beoplay-software-updateBeoplay Software Update1.0.6bestresBestRes1.0.0,1426778671betaflight-configuratorBetaflight-Configurator10.7.0better-window-managerBetter Window Manager1.14.15bettertouchtoolBetterTouchTool3.402-1633betterzipBetterZip5.0.3betweenBetween1.0.4betwixtBetwixt1.6.1beyond-compareBeyond Compare4.3.6.25063bfxrBfxrlatestbibdeskBibDesk1.7.8big-mean-folder-machineBig Mean Folder Machine2.41bilibiliBilibili2.56biliminibilimini1.4.5binary-ninjaBinary NinjalatestbingpaperBingPaper0.11.1,46binoBino1.6.6biopassfidoBioPass FIDO2 ManagerlatestbirdfontBirdFont4.7.14biscuitBiscuit1.2.11bisqBisq1.3.9bit-slicerBit Slicer1.7.9bitbarBitBar1.9.2bitcoin-coreBitcoin Core0.20.1bitmessageBitmessage0.6.3.2bitrix24Bitrix2410.0.95.51bitsharesBitShares3.3.191120bitwardenBitwarden1.22.1bitwig-studioBitwig Studio3.2.8blackholeBlackHole0.2.6blenderBlender2.90.0blheli-configuratorBLHeli Configurator1.2.0blink1controlBlink1Control2.2.4bliskBlisk Browser12.0.92.83blitzBlitz1.12.7blizzBlizz15.10.2blobby-volley2Blobby Volley 21.0blockblockBlockBlock1.0.2blockstackBlockstack0.37.0blocsBlocs3.5.4bloodhoundbloodhound3.0.5bloomrpcBloomRPC1.4.1blooothe blooo2.1.5blu-ray-playerMacgo Mac Blu-ray Player3.3.19,191021blu-ray-player-proMacgo Mac Blu-ray Player Pro3.3.19_191021_2039blue-jeans-browser-pluginBlue Jeans Browser Plug-in2.115.99.8bluefishBluefish2.2.11bluegriffonBlueGriffon3.1blueharvestBlueHarvest8.0.2bluejBlueJ4.2.2bluejeansBlueJeans2.23.0.226bluesenseBlueSense1.3.1bluestacksBlueStacks4.230.10.2820,37a27c17...bluetilityBluetility1.3blurredBlurred1.2.0bobBob0.4.0boincBerkeley Open Infrastructure for Network Computing7.16.11bonitastudiocommunityBonita Studio Community Edition7.11.1bonjeffBonjeff1.0.8bonjour-browserBonjour BrowserlatestbookendsBookendslatestbookmacsterBookMacster2.10.28boomBoom1.6.9,1575451705boom-3dBoom 3D1.3.7boonziBoonzi44.2boopBoop1.3.0boostnoteBoostnote0.16.1bootchampBootChamp1.7bootstrap-studioBootstrap Studio5.3.1bootxchangerBootXChanger2.0bossabossa1.9.1bot-framework-emulatorMicrosoft Bot Framework Emulator4.10.0bowtieBowtie1.5box-driveBox Drivelatestbox-notesBox Notes1.4.0box-syncBox Synclatestbox-toolsBox ToolslatestboxcryptorBoxcryptor2.35.1024boxerBoxer1.4.0boxofsnoo-fairmountFairmount1.1.3boxy-suiteBoxy SuitelatestbracketsBrackets1.14.2brain-workshopBrain Workshop4.8.4brainfmBrain.fm0.1.5brave-browserBrave85.1.14.81,114.81breakawayBreakaway2.0.1breaktimerBreakTimer0.7.5brewservicesmenubarBrew Services Menubar3.0.0brewtargetbrewtarget2.3.0briaBria6.2.0_104643bricklink-partdesignerPartDesigner1.0.6_5bricklink-studioStudio2.1.9_1bricksmithBricksmith3.0brightnessBrightness1.1.2brightness-syncBrightness Sync2.2.0briskBrisk1.2.0brisyncBrisync1.2.0brl-cad-mgedBRL-CAD7.24.0brogueBrogue1.7.5brookBrook20200909brooklynBrooklyn2.0.1browserosaurusBrowserosaurus12.2.2browserstacklocalBrowserStack Locallatestbtcpayserver-vaultBTCPayServer Vault1.0.4buboBubo1.0buildsettingextractorBuildSettingExtractor1.4.1bunchBunch1.2.8,48bunqcommunity-bunqbunqDesktop0.9.10burnBurn2.7.10burp-suiteBurp Suite2020.9.1busycalBusyCal3.10.4,401052busycontactsBusyContacts1.4.10,141003butlerButler4.3.3buttBroadcast Using This Tool0.1.22butterButter0.3.0buttercupButtercup1.20.5bwanaBwanalatestbzflagBZFlag2.4.20c0re100-qbittorrentqBittorrent Enhanced Edition4.2.5.16cabalCabal6.0.5cacherCacher2.32.6caffeineCaffeine1.1.3cajviewerCAJViewer2.0cakebrewCakebrew1.2.5calcserviceCalcService3.5calendar-366Calendar 366 II2.8.8calibrecalibre4.23.0camedCAM Editor3.2.2camera-liveCamera Live11camerabag-photoCameraBag3.1.0camo-studioCamo Studio1.0.8,83camtasiaCamtasia2020.0.8camunda-modelerCamunda Modeler4.2.0canaryCanary2.10,432candybarCandyBar3.3.4cantataCantata2.3.2caprineCaprine2.49.0captainCaptainlatestcaptinCaptin1.1.0,119:1585846526captionCaption2.0.1captoCaptolatestcarbon-copy-clonerCarbon Copy Cloner5.1.21.6053cardhopCardhop1.3.5caretCaret3.4.6cashnotifyCashNotify3.3.2catalina-cache-cleanerCatalina Cache CleanerlatestcatchCatch1.9.4catlightcatlight2.32.2cave-storyPixel Cave Story0.1.0ccleanerPiriform CCleaner1.17.603ccmenuCCMenu14.0cctalkCCtalk7.7.2.2cd-tocd to3.1celestialteapot-runwayRunway1.9celldesignerCellDesigner4.4.2celleryCellery0.6.0cellprofilerCellProfiler4.0.4cemuCEmu1.3cerebroCerebro0.3.2cernboxCERNBox Client2.5.4.2623cevelopCevelop1.14.1-202002280945chaiChai3.2.0chalkChalk1.6.3chameleon-ssd-optimizerChameleon SSD optimizer0.9.9gcharlesCharles4.5.6charlessoft-timetrackerTimeTrackerlatestchatmate-for-facebookChatMate for Facebook4.3.1,482:1537946763chatmate-for-whatsappChatMate for WhatsApp4.3.1,482:1537891987chatologyChatology1.2.4chattyChatty0.12chatworkChatWorklatestcheatsheetCheatSheet1.5.2checkra1ncheckra1n0.11.0cheetah3dCheetah3Dlatestchef-workstationChef Workstation20.9.136chemdoodleChemDoodle11.0.0chessxChessX1.5.4chiakiChiaki1.2.1chirpCHIRP20200909chocolatChocolat3.4choosyChoosy2.1chrome-devtoolsChrome DevTools1.1.0chrome-remote-desktop-hostChrome Remote DesktoplatestchromedriverChromeDriver85.0.4183.87chromiumChromium808683chronicleChronicle9.7.2chronoagentChronoAgentlatestchronosChronos Timetracker4.2.0chronosyncChronoSync4.9.11chronycontrolChronyControl1.3.3chrysalisChrysalis0.7.9cinchCinch1.2.4cinderCinder0.9.1cinebenchCinebenchR20,281795cisco-jabberCisco Jabber20200710062404cisco-proximityCisco Proximity3.0.8cisdem-data-recoveryCisdem Data Recovery6.4.0cisdem-document-readerCisdem Document Reader5.2.0cisdem-pdf-converter-ocrCisdem PDF Converter OCR7.5.0cisdem-pdfmanagerultimateCisdem PDFManagerUltimate2.5.0cisdem-pdftoolkitCisdem PDFToolkitlatestcitraCitralatestcityofzion-neonNeon Wallet2.5.0ckanComprehensive Kerbal Archive Network client1.28.0ckb-nextckb-next0.4.2clamxavClamXAV3.1_8514clash-for-windowsClash for Windows0.11.9clashxClashX1.30.2clashxrClashXR1.30.1classroom-assistantGitHub Classroom Assistant2.0.2clean-meClean-me1.4.2cleanappSynium Software CleanApp5.1.3cleanmymacCleanMyMac X4.6.13cleanshotCleanShot3.3.7cleartextCleartext2.45clementineClementine1.3.1clickchartsClickChartslatestclickupClickUp2.0.18clionCLion2020.2.3,202.7319.72clip-studio-paintCLIP STUDIO PAINT1.9.11clipbuddyClipBuddy2.10.26clipgrabClipGrab3.8.14clipyClipy1.2.1cliqzCLIQZlatestclixCLIX2.4.0.0cljstylecljstyle0.13.0clockClock1.1clock-barClock Bar1.0,1801968clockifyClockify2.5.5clocksaverClock.saver screensaver0.7.0clone-heroClone Hero0.23.2.2clonkClonk Ragelatestcloud-pbxCloud PBX22.9.10.219cloudappCloudApp6.3.0.2129cloudcompareCloudComparelatestcloudflare-warpCloudflare WARPlatestcloudmounterEltima CloudMounter3.6.611cloudupClouduplatestcloudytabsCloudyTabs1.9.1clover-configuratorClover ConfiguratorlatestcmakeCMake3.18.3cmd-eikanacmd-eikana2.2.3cmdtapCmdTap1.9.4cncjsCNSjs1.9.22cncnetCnCNet: Classic Command & ConquerlatestcoccinellidaCoccinellida0.7coccocCốc CốclatestcockatriceCockatrice2.7.5,2020-08-23:Bless...cocktailCocktail13.2.5cocoapodsCocoaPods.app1.5.2cocoarestclientCocoaRestClient1.4.5cocoaspellcocoAspell2.5coconutbatterycoconutBattery3.9.1,0af56ac0coconutidcoconutID3.4codaPanic Coda2.7.5code-notesCode Notes1.2.4code42-crashplanCrashPlan7.0.3codeexpanderCodeExpander3.5.3codekitCodeKit3.12.5,32186codeliteCodeLite14.0.0coderunnerCodeRunner3.1codespaceCodespace1.3.0cold-turkey-blockerCold TurkeylatestcollabshotCollabshot1.2.3.985color-oracleColor Oraclelatestcolorchecker-camera-calibrationColorChecker Camera Calibration2.1.0colormunki-photoColorMunki Photolatestcolorpicker-developerDeveloper Color Picker1.5.4colorpicker-materialdesignMaterial Design1.0.0colorpicker-propickerPro Picker1.0colorpicker-skalacolorSkala Color2.10colorsnapperColorSnapper 21.6.3colortesterColorTesterlatestcolour-contrast-analyserColour Contrast Analyser (CCA)3.1.1combine-pdfsCombine PDFs5.5.2comictaggerComicTagger1.2.3comma-chameleonComma Chameleon0.5.2command-tab-plusCommand-Tab Plus1.121commander-oneCommander One2.5commandqCommandQ2.0.5comparemergeCompareMerge2.13z,113composercatComposercat0.4.0compositorCompositor1.14.0conferencesConferences.digital0.0.1-alpha22connectiqGarmin Connect IQ SDK3.1.8-2020-05-01-5a72d...connectmenowConnectMeNow3.0.7consoleConsole0.3.0container-psContainer PS1.2.1contextsContexts3.7.1continuity-activation-toolContinuity Activation ToollatestcontrasteContraste1.0controllermateControllerMate4.11.1controlplaneControlPlane1.6.7cookieCookie6.1.5cool-retro-termcool-retro-term1.1.1cooltermCoolTermlatestcopyclipCopyClip2.9.98.3copyqCopyQ3.12.0copytranslatorCopyTranslator9.0.2coqideCoq8.12.0cordCoRD0.5.7core-data-editorCore Data Editor5.2corelocationcliCore Location CLI3.2.0cornercalCornerCal1.1cornerstoneCornerstone4.2corona-trackerCorona Tracker1.7.2coronasdkCorona SDK2018.3326correttoAmazon Corretto11.0.8.10.1coteditorCotEditor3.9.6couchbase-server-communityCouchbase Server6.6.0couchbase-server-enterpriseCouchbase Server6.6.0couchpotatoCouchPotato3.0.1couleursCouleurs1.2.1countdownCountdown Screensaver0.1.0coverloadCoverLoad2.1.1-752cozy-driveCozy Drive3.22.0cpuinfocpuinfolatestcrCool Reader3.0.56,10craftCraftlatestcraftmanagerCraftManager1.0.100create-recovery-partition-installerCreate Recovery Partition Installer1.1createuserpkgCreateUserPkg1.2.4creepyCreepy1.4.1cricut-design-spaceCricut Design Space Plugin5.8.1808.282223criptextCriptextlatestcronnixCronniX3.0.2crossoverCrossOver19.0.2crosspack-avrCrossPack2013-12-16crunchCrunch4.0.0crushftpCrushFTP9cryocryo0.5.22cryptCrypt3,20100429crypterCrypter5.0.0cryptomatorCryptomator1.5.8cryptrCryptr0.3.0crystalmakerCrystalMaker10.5.4crystax-ndkCrystax NDK10.3.2cscreencscreen2012.09cubicsdrCubicSDR0.2.5cuda-zCUDA-Z0.10.251cumulusCumulus0.10.1cura-lulzbotCura LulzBot Edition3.6.21,ce3e47a08065c66...curioCurio14030.6cursorcererCursorcererlatestcursorsenseCursorSense2.1.2customshortcutsCustomShortcuts1.0.3cuteclipsCuteClips3.1.23cutesdrCuteSDR1.20cutterCutter1.12.0cyberduckCyberduck7.6.1.33485cyberghost-vpnCyberGhost7.1.0.92cycling74-maxCycling ‘74 Max8.1.6_200922cytoscapeCytoscape3.8.1daedalusDaedalus0.15.1,3.1.0:8695daedalus-mainnetDaedalus Mainnet2.2.0,14276daisydiskDaisyDisk4.11dangerzoneDangerzone0.1.1darktabledarktable3.2.1darwindumperDarwinDumper3.1.1dashDash5.4.1dash-dashDash0.15.0.0dashcam-viewerDashcam Viewer3.5.2dashlaneDashlane6.2037.0.39133datDat Desktop3.0.1data-integrationPentaho Data Integration9.0.0.0-423data-rescueData Rescue 66.0.1data-science-studioDataiku Data Science Studio8.0.1datadog-agentDatadog Agent7.22.0-1datagraphDataGraphlatestdatagripDataGrip2020.2.3,202.7319.56datazenitDatazenit1.1.0datovkaDatovka4.15.3datweatherdoeDatWeatherDoe1.3.0davmailDavMail5.5.1-3299day-oDay-O3.0.1db-browser-for-sqliteDB Browser for SQLite3.12.0dbeaver-communityDBeaver Community Edition7.2.1dbeaver-enterpriseDBeaver Enterprise Edition7.2.0dbglassDBGlass0.1.0-beta.6dbkodadbKodalatestdbnginDBngin32dbschemaDbSchema8.3.1dbvisualizerDbVisualizer11.0.5dcommanderDCommander3860dcp-o-maticDCP-o-matic2.14.38dcp-o-matic-batch-converterDCP-o-matic Batch converter2.14.38dcp-o-matic-encode-serverDCP-o-matic Encode Server2.14.38dcp-o-matic-kdm-creatorDCP-o-matic KDM Creator2.14.38dcp-o-matic-playerDCP-o-matic Player2.14.38dcv-viewerNICE DCV Viewer2020.1.1910dd-utilitydd Utility1.11deadboltDeadbolt0.1.0deathtodsstoreDeathToDSStorelatestdebookeeDebookee7.5.1decksetDeckset2.0.18,2582decoDeco0.7.1decreditonDecrediton1.5.2deeperDeeper2.5.9deepgitDeepGit4.0.2deeplDeepL1.10.1deepstreamdeepstream5.0.5deezerDeezer4.23.1default-folder-xDefault Folder X5.4.6dejaluDejaLu1.0,217delayedlauncherDelayedLauncher2.2.1delicious-libraryDelicious Library3.9.2deltaDelta1.0.0deltawalkerDeltaWalker2.5.6delugeDeluge1.3.15.1dendroscopeDendroscope3.7.2denemoDenemo2.2desktoputilityDesktopUtilitylatestdesmumeDeSmuME0.9.11detectx-swiftDetectX Swift1.0971detexifyDetexifylatestdevdocsDevDocs App0.7.1developerexcusesDeveloper Excuses Screensaver2.1.3devolo-cockpitDevolo dLAN Cockpit5.1.3devonagentDEVONagent Pro3.11.3devonthinkDEVONthink3.5.2dexedDexed0.9.4dhsDylib Hijack Scanner1.4.1diaDia0.97.2,7dialpadDialpadlatestdiashapesDia0.3.0dictaterDictater1.2dictcc-en-de-dictionary-plugindict.cc English-German dictionary pluginlatestdictionariesDictionaries1.5,344:1590512627dictunifierDictUnifier2.1diffforkDiffFork1.1.9.2diffmergeDiffMerge4.2.1.1013digikamdigiKam7.1.0dingtalkDingTalk5.1.5.0disablemonitorDisableMonitor1.92discordDiscord0.0.259discretescrollDiscreteScroll0.1.1disk-arbitratorDisk Arbitrator0.8.0disk-drillDisk Drill3.8.977disk-inventory-xDisk Inventory X1.3diskcatalogmakerDiskCatalogMaker8.2.5diskmaker-xDiskMaker X9diskwaveDiskWave0.4displapertureDisplaperturelatestdisplaycalDisplayCAL3.8.9.3dissenter-browserDissenter0.70.122,5d3f93a29dd49...dittoDitto1.8.0divvyDivvy1.5.1djay-proAlgoriddim djay Pro2.2.6,202009161159djvDJV Imaging1.3.0djviewDjView4.10.6,57cdmenu-macdmenu-mac0.5.0dmm-playerDMM Player2.0.10dmm-player-for-chromeDMM Player for Chrome1.5.0.10do-not-disturbDo Not Disturb1.3.0docearDocear1.2.0.0_stable_build291dockerDocker Desktop2.3.0.5,48029docker-toolboxDocker Toolbox19.03.1dockeydockeylatestdockstationDockStation1.5.1dogecoinDogecoin1.14.2dolphinDolphin5.0dolyDoly Ebook Reader2.19.0domainbrainDomainBrain2.0.1doomrlDoom the Roguelike0.9.9.7doomsday-engineDoomsday Engine2.2.2dosboxDOSBox0.74-3dosbox-xDOSBox-X0.83.5,20200901011555doteditorDotEditor0.3.1dotnet.Net Core Runtime3.1.8,c7360900-c6b2-40...dotnet-sdk.NET Core SDK3.1.402,340e6cc2-cce5-...double-commanderDouble Commander0.9.9-9478doubletwistdoubleTwistlatestdownieDownie4.1.5,4159doxieDoxie2.12.2doxygenDoxygen1.8.20dozerDozer4.0.0dragthingDragThing5.9.17dramaDrama2.1drawbotDrawBot3.126drawiodraw.io Desktop13.7.3dremel-slicerDremel DigiLab 3D Slicer1.2.3drivedxDriveDX1.9.1drivethrurpgDriveThruRPG Library App2.0.3.2droididDroidIDlatestdrop-to-gifDrop to GIF1.28dropboxDropboxlatestdropbox-passwordsDropbox Passwords5.2.4dropdmgDropDMG3.5.10dropletmanagerDigitalOcean Droplets Manager0.5.0droplrDroplr5.7.2,426dropshareDropshare5.6.3,5148dteoh-devdocsDevDocs App0.5.2duckietvduckieTV1.1.5duefocusDueFocus2.5.0duetDuet2.3.1.8duktoDuktoR6dungeon-crawl-stone-soup-consoleDungeon Crawl Stone Soup0.25.1dungeon-crawl-stone-soup-tilesDungeon Crawl Stone Soup0.25.1duo-connectDuoConnect1.1.1duoshaoduoshao0.1.7dupegurudupeGuru4.0.3duplicacyDuplicacy2.1.2duplicacy-web-editionDuplicacy Web Edition1.4.1duplicate-annihilator-for-photosDuplicate Annihilator for PhotoslatestduplicatiDuplicati2.0.5.1,2020-01-18dupscanubDupScan2.4.1dust3dDust3D1.0.0-rc.6dustyDusty0.7.5dvdstylerDVDStyler3.1dwarf-fortressDwarf Fortress0.47.04dwarf-fortress-lmpDwarf Fortress LMP (Lazy Mac Pack)0.47.04 dfhack-b1dwgseeDWGSeelatestdwihn0r-keepassxKeePassX0.4.4
Источник: [https://torrent-igruha.org/3551-portal.html]
Apple Remote Desktop 3.2 serial key or number

O SPOLEČNOSTI

Společnost MEDIHOPE s.r.o. byla založena v roce 2002 za účelem provozování magnetické rezonance v Olomouckém kraji. Díky společníkům a také potřebou největší nemocnice zřizované krajem bylo rozhodnuto o umístění tohoto špičkového diagnostického přístroje do Prostějova. Vstřícnost managementu Nemocnice Prostějov a vedení Olomouckého kraje nám umožnila vytvořit ambulantní zařízení přímo v areálu Nemocnice Prostějov. Naše pracoviště úzce spolupracuje se všemi odděleními prostějovské nemocnice.

Pracoviště magnetické rezonance MEDIHOPE s.r.o. se začalo budovat v listopadu roku 2004. Na výstavbě se podílela prostějovská společnost POZEMSTAV Prostějov a.s., která výrazně pomohla svým profesionálním přístupem, k rychlému otevření našeho pracoviště. Po odsouhlasení projektu a provedení nezbytných stavebních úprav dorazil do prostějovské nemocnice jeden z nejmodernějších diagnostických přístrojů vyráběný společností GE Medical Systems - GE Signa Excite 1.5 T .

Rozvoj společnosti MEDIHOPE s.r.o. pokračoval v dalších letech rozšířením poskytovaných zdravotnických služeb. V současné době provozujeme operační sály, kde naši zkušení lékaři a sestry operují v režimu jednodenní chirurgie. Jedná se o obory - ortopedie, gynekologie, maxilofaciální chirurgie a chirurgie.

V roce 2017 bylo otevřeno pracoviště magnetické rezonance v OLOMOUCI, HEYROVSKÉHO 1a.
 

All right reserved for MEDIHOPE s.r.o., Copyright 2009

Источник: [https://torrent-igruha.org/3551-portal.html]
.

What’s New in the Apple Remote Desktop 3.2 serial key or number?

Screen Shot

System Requirements for Apple Remote Desktop 3.2 serial key or number

Related Posts

About Author

admin

Add a Comment

Your email address will not be published. Required fields are marked *