Dr. Cleaner 98 2.2.32 serial key or number

Supported Hardware

Cisco IOS Release 15.0S supports the following platforms, including the following models and supervisor engines:

• Cisco 7600 series routers (Cisco 7603-S, Cisco 7604, Cisco 7606, Cisco 7606-S, Cisco 7609, Cisco 7609-S, and Cisco 7613)
• Supervisor Engine 32, Supervisor Engine 720, Route Switch Processor 720
• RSP720-10GE

Determining the Software Version

To determine the version of Cisco IOS software that is running on your Cisco router, log in to the router and enter the show version EXEC command:

Feature Support

Cisco IOS software is packaged in feature sets that consist of software images that support specific platforms. The feature sets available for a specific platform depend on which Cisco IOS software images are included in a release. Each feature set contains specific Cisco IOS features.

Feature-to-image mapping is available through Cisco Feature Navigator. Cisco Feature Navigator is a web-based tool that enables you to determine which Cisco IOS software images support a specific set of features and which features are supported in a specific Cisco IOS image. You can search by feature or by feature set (software image). You can compare Cisco IOS software releases side-by-side to display both the features unique to each software release and the features that the releases have in common.

Cisco Feature Navigator is updated regularly when major Cisco IOS software releases and technology releases occur. For the most current information, go to the Cisco Feature Navigator home page at the following URL:

www.cisco.com/go/cfn

For help with Cisco Feature Navigator, see the help information at the following URL:

http://www.cisco.com/web/applicat/CFNTOOLS/Help_Docs/help/cfn_support.html

Determining the Software Images (Feature Sets) That Support a Specific Feature

To determine which software images (feature sets) in a Cisco IOS release support a specific feature, go to the Cisco Feature Navigator home page and perform the following steps.

Step 1 From the Cisco Feature Navigator home page, click Research Features .

Step 2 Select your software type or leave the field as “All”.

Step 3 To find a feature, you can search by either Feature or Technology (select the appropriate button). If you select Search by Feature, you can further filter your search by using the Filter By text box.

Step 4 Choose a feature from the Available Features text box, and click the Add button to add the feature to the Selected Features text box.

Note To learn more about a feature in the list, click the View Desc button in the Available Features text box.

Repeat this step to add features. A maximum of 20 features can be chosen for a single search.

Step 5 Click Continue when you are finished choosing features.

Step 6 In the Release/Platform Tree area, select either your release (from the Train-Release list) or your platform (from the Platform list).

Step 7 The “Search Result” table will list all the software images (feature sets) that support the features that you chose.

Note You can download your results into an Excel spreadsheet by clicking on the Download Excelbutton.

Determining the Features Supported in a Specific Software Image (Feature Set)

To determine which features are supported in a specific software image (feature set), go to the Cisco Feature Navigator home page and perform the following steps.

Step 1 From the Cisco Feature Navigator home page, click Research Software .

Step 2 Select your software type from the drop-down list and chose the Release button in the “Search By” area.

Step 3 From the Major Release drop-down list, chose the appropriate major release.

Step 4 From the Release drop-down list, choose the appropriate maintenance release.

Step 5 From the Platform drop-down list, choose the appropriate hardware platform.

Step 6 From the Feature Set drop-down list, choose the appropriate feature set. The Image Details area will provide details on the specific image. The Available Features area will list all the features that are supported by the feature set (software image) that you chose.

Note To learn more about a feature in the list, click the View Desc button in the Available Features text box.

Memory Recommendations

To determine memory recommendations for software images (feature sets) in your Cisco IOS release, go to the Cisco Feature Navigator home page and perform the following steps.

Step 1 From the Cisco Feature Navigator home page, click Research Software .

Step 2 Select your software type from the drop-down list and choose the Release button in the “Search By” area.

Step 3 From the Major Release drop-down list, choose the appropriate major release.

Step 4 From the Release drop-down list, choose the appropriate maintenance release.

Step 5 From the Platform drop-down list, choose the appropriate hardware platform.

Step 6 From the Feature Set drop-down list, choose the appropriate feature set.

Step 7 The Image Details area will provide details on the specific image including the DRAM and flash memory recommendations for each image. The Available Features area will list all the features that are supported by the feature set (software image) that you chose.

New Hardware Features in Cisco IOS Release 15.0(1)S2

There are no new hardware features in Cisco IOS Release 15.0(1)S2.

New Software Features in Cisco IOS Release 15.0(1)S2

This section describes new and changed features in Cisco IOS Release 15.0(1)S2. Some features may be new to Cisco IOS Release 15.0S but were released in earlier Cisco IOS software releases. Some features may have been released in earlier Cisco IOS software releases and have been changed in Cisco IOS Release 15.0(1)S2. Links to feature modules are included below. If a feature listed below does not have a link to a feature module, that feature is documented only in the release notes, and information about whether the feature is new or changed will be available in the feature description provided below.

MLDP-Based MVPN

The MLDP-based MVPN feature provides extensions to Label Distribution Protocol (LDP) for the setup of point-to-multipoint (P2MP) and multipoint-to-multipoint (MP2MP) label switched paths (LSPs) for transport in the Multicast Virtual Private Network (MVPN) core network.

For detailed information about this feature, see the following Cisco document:

http://www.cisco.com/en/US/docs/ios/ipmulti/configuration/guide/imc_mldp_mvpn.html

New Hardware Features in Cisco IOS Release 15.0(1)S

This section describes new and changed features in Cisco IOS Release 15.0(1)S. Some features may be new to Cisco IOS Release 15.0S but were released in earlier Cisco IOS software releases. Some features may have been released in earlier Cisco IOS software releases and have been changed in Cisco IOS Release 15.0(1)S. Links to feature modules are included below. If a feature listed below does not have a link to a feature module, that feature is documented only in the release notes, and information about whether the feature is new or changed will be available in the feature description provided below.

New Software Features in Cisco IOS Release 15.0(1)S

This section describes new and changed features in Cisco IOS Release 15.0(1)S. Some features may be new to Cisco IOS Release 15.0S but were released in earlier Cisco IOS software releases. Some features may have been released in earlier Cisco IOS software releases and have been changed in Cisco IOS Release 15.0(1)S. Links to feature modules are included below. If a feature listed below does not have a link to a feature module, that feature is documented only in the release notes, and information about whether the feature is new or changed will be available in the feature description provided below.

Multicast MIB VRF Support

The Multicast MIB VRF Support feature is an enhancement to help manage Cisco devices in a multicast VPN (MVPN) environment using SNMP. This feature enhances the Cisco suite of supported multicast MIBs by making the following multicast MIBs VRF aware:

• CISCO-IPMROUTE-MIB
• CISCO-PIM-MIB
• IGMP-STD-MIB
• IPMROUTE-STD-MIB
• MSDP-MIB
• PIM-MIB

Multicast VRF (MVRF) awareness enables the MIB objects associated with these multicast MIBs to be queried and set for the individual MVRFs configured. In addition, MVRF awareness provides the capability to detect conditions for a trap inside of an MVRF and look up the correct information for that MVRF; the traps would then be sent to the SNMP manager that is configured for that MVRF.

For detailed information about these MIBs, and to locate and download MIBs for selected platforms, Cisco IOS releases, and feature sets, use Cisco MIB Locator found at http://www.cisco.com/go/mibs .

Video Monitoring MIB Support for Medianet Video Monitoring

Platform: Cisco 7600

This feature provides support for the use of the industry-standard Simple Network Management Protocol (SNMP) to monitor media streams. This support is implemented with the addition of the following Cisco proprietary SNMP Management Information Base (MIB) modules:

• CISCO-FLOW-MONITOR-TC-MIB—Defines the textual conventions common to the following MIB modules.
• CISCO-FLOW-MONITOR-MIB—Defines the framework that describes the flow monitors supported by a system, the flows that it has learned, and the flow metrics collected for those flows.
• CISCO-MDI-METRICS-MIB—Defines objects that describe the quality metrics collected for media streams that comply to the Media Delivery Index (MDI) [RFC 4445].
• CISCO-RTP-METRICS-MIB—Defines objects that describe the quality metrics collected for RTP streams, similar to those described by an RTCP Receiver Report packet [RFC 3550].
• CISCO-IP-CBR-METRICS-MIB—Defines objects that describe the quality metrics collected for IP streams that have a Constant Bit Rate (CBR).

For detailed information about these MIBs, and to locate and download MIBs for selected platforms, Cisco IOS releases, and feature sets, use Cisco MIB Locator found at http://www.cisco.com/go/mibs .

This feature also includes two new command-line interface (CLI) commands and one modified CLI command. The commands are as follows:

• snmp-server host —Enables the delivery of flow monitoring SNMP notifications to a recipient.
• snmp-server enable traps flowmon —Enables flow monitoring SNMP notifications. By default, flow monitoring SNMP notifications are disabled.
• snmp mib flowmon alarm history —Sets the maximum number of entries maintained by the flow monitor alarm history log.

For more information about these commands, see the Cisco IOS Master Command List.

WANPHY and OTN Support on ES+XC Combination Line Card

Platform: Cisco 7600

For detailed information about this feature, see the following Cisco document: